When you look around your home, there are certain parts that look great. Then, there are others that could certainly use some improvements. Your tub could be one that could stand to be refinished, especially if it looks like it was last done during the Gerald Ford administration. When it comes to refinishing parts of your home, refinishing your tub is an especially budget-friendly home improvement. According to Home Guide, you could expect to pay anywhere between $275 and $559. Cost-effectiveness is only one reason to enlist the help of bathtub refinishing businesses, and here are nine more.

1. They Have the Proper Equipment and Knowledge

Yes, there are plenty of DIY kits that you can find in stores, but you need to be careful, especially when it comes to re-glazing your tub. There are chemicals in there that can be dangerous if you don't have the right equipment or ventilation. It could even lead to significant injuries or death. The professionals will have equipment that lets them protect themselves as well as you, especially if your bathroom doesn't have windows. Also, their knowledge will let them do the job in the most efficient way, and they will still make sure it turns out looking great.

2. They Will Correctly Prep Things

Just like painting walls in your home, you don't immediately apply the main layer when refinishing a bathtub. If so, it wouldn't last for very long. Instead, the walls need to be prepped. The same thing goes for the bathtub. Before the glaze is added, the tub has to be spotless and scrubbed. Otherwise, there could be contaminants that keep the glaze from properly adhering. Professionals from bathtub refinishing businesses will do just that. They will make sure there is no dirt and debris that could leave a residue. Also, they will inspect the tub for mineral deposits that could cause any rust or corrosion.

3. They Will Follow the Proper Safety Protocol

We mentioned safety a bit earlier, but the importance of safety during this process can't be overstated. There are a lot of products out there that, while useful for doing things like cleaning, can be dangerous if mixed. Let's take ammonia and bleach. These two products should never be mixed together, since they can create a very toxic gas.

The same goes for the re-glazing process. If you attempted to do it yourself, there would be too many steps for you to make sure you're following. Bathtub refinishing businesses have this process memorized, so they can set things up properly while also telling you when you'll be able to use the tub again after they're finished.

4. They Will Use the Right Tools

Have you looked at bathtubs that haven't been refinished properly? It's immediately noticeable. They look flaky and it's easy to see pieces falling off. Part of this can be due to not following the directions on the solvent cleaner. They should tell you not to use a certain type of scrubbing pad.

If you ignore that, then you'll find yourself displeased with the results. Alternatively, bathtub refinishing businesses know what kinds of pads they can use, what kind of solvent cleaner works best, and that it's important to avoid using a metal scrubbing pad on an acrylic tub. The results of using a metal scrubbing pad would be disastrous.

5. They Will Use the Right Coating

Yes, you need to know what kind of coating goes with the surface of your tub. You wouldn't want to use one that's incompatible with your fiberglass tub, right? This is another service bathtub refinishing businesses are highly skilled at. They know what coating will go with whatever tub that they're refinishing. You won't have to worry about possible damages in this regard or the coating not properly adhering, otherwise, you would need to get the tub refinished yet again.

6. They Will Apply the Coating Correctly

Think of this like painting your walls. If you paint them yourselves, you might not use the correct brushstrokes, and the results can be inadequate. The same reasoning goes for applying the coating of glaze to the tub. You don't want to have streaks showing up on it. The refinishing experts know how to smoothly apply the glaze so that the end result will be a tub that looks like it is fresh out of the showroom. This is another key reason to let bathtub refinishing businesses handle the job.

7. They Will Allow Enough Time for the Tub to Cure

Just like putting a coat of epoxy on a floor, you need to allow the coating to adhere to the surface of your tub. In the case of the floor, we've seen that you usually have to wait a day or two to walk on it. Usually, the same goes for being able to use the tub, although this depends on what type of coating is applied. If you do it yourself and jump right in the tub, it can cause all kinds of damage. The refinishing specialist will tell you how long you need to wait. This will allow you to get the best results from the application.

8. They Will Use Quality Materials

There are times when you can get away with using some lesser-quality materials. However, you don't want to use a bargain brand tub coating. You won't get the results you want from them, and you could wind up with more problems than solutions. Talk to a tub refinishing expert. They'll know which materials are of the highest quality, and they may have access to excellent materials you may not have access to. They'll gladly apply them for you to make sure you have the tub of your dreams when they're finished.

9. They Will Ensure There Is Proper Ventilation

This is one major part of safely being able to refinish a bathtub. There has to be proper ventilation, whether it's with an open window or a ventilation fan. The fumes can be damaging or even deadly. Even professionals who aren't properly protected can face harmful injuries, including heart attacks due to the chemicals. Not only do they need to wear protective clothing, but they also need to protect their eyes, noses, and mouths. The fumes can irritate their eyes, as well.

As you can see, there are a lot of things that these experts can do to make sure your tub looks perfect afterward. Even if you are a somewhat skilled DIY-er, you should make sure to leave this one for the professionals. The reasons above speak for themselves.

There's no denying that in this current economy, it can be tempting to try to save money by doing things like refinishing your tub yourself. The problem is that if you make a mistake, it can wind up costing you a lot. This cost can show itself in having to pay for damage repairs, or it could be even worse, with your health or even your life being the toll. Are you looking for bathtub refinishing businesses in your area? We have an experienced team of contractors that will do the job safely and efficiently. Contact Bath Magic today to learn more or get started with our amazing services.