First, do not touch the reglazed surface until the designated curing time. Do not open windows, or turn on air fans, as this may cause dirt and debris to fall into the fresh reglazing material, resulting in sharp points forming in the surface. If debris does fall into the tub, do not attampt to remove, as these will wear off over the first months use.
Water drip bags have been placed over the water spout, to protect against water dripping onto the freshly reglazed surface. Should the bags begin to fill, the customer must replace the bags, or turn off the water flow.
At the conclusion of the drying time, carefully remove any protective paper that was left, and discard. Replace the drain screen, and overflow stopper.
Immediately recaulk around the DRAIN LIP, and the TUB RIM. Also, if it was not possible for our technicians to remove the overflow linkage, recaulk around the overflow plate also. Failure to apply and maintain a proper caulk seal may lead to water damage, and cause the reglazed material to peel. DO NOT USE SELF ADHESIVE CAULKING STRIPS.
bath bathtub tub sink tile shower bathroom porcelain bath magic ugly tub
bath reglazing bath refinishing bath resurfacing bathtub reglazing bathtub refinishing bathtub resurfacing
tub reglazing tub refinishing tub resurfacing sink reglazing sink refinishing sink resurfacing
tile reglazing tile refinishing tile resurfacing shower reglazing shower refinishing shower resurfacing
cincinnati columbus dayton detroit indianapolis louisville madison rockford toledo
ohio michigan indiana kentucky illinois wisconson
bathroom reglazing bathroom refinishing bathroom resurfacing remodeling
Got an Ugly Tub?
Don't replace it...Reglaze It !!
Bath Magic Inc.